Difference between revisions of "TUFLOW Message 1117"
Jump to navigation
Jump to search
| Line 11: | Line 11: | ||
For a detalied description of these options see Section 4.5.1.3 (Connecting Pits and Nodes to 2D Domains) and Table 4.14 (1D model Network (1d_nwk) Attribute Descriptions) of the TUFLOW manual (2010 version). | For a detalied description of these options see Section 4.5.1.3 (Connecting Pits and Nodes to 2D Domains) and Table 4.14 (1D model Network (1d_nwk) Attribute Descriptions) of the TUFLOW manual (2010 version). | ||
|suggestions=Specify a valid attribute as per the list above. | |suggestions=Specify a valid attribute as per the list above. | ||
| − | + | ||
| − | |||
| − | |||
|prelink=[[TUFLOW_Message_1116|Message 1116]] | |prelink=[[TUFLOW_Message_1116|Message 1116]] | ||
|uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]] | |uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]] | ||
|nextlink=[[TUFLOW_Message_1118|Message 1118]] | |nextlink=[[TUFLOW_Message_1118|Message 1118]] | ||
}} | }} | ||
Revision as of 16:37, 1 July 2022
TUFLOW Message
ERROR 1117 - Invalid Conn_2D attribute at pit or node. Cannot exceed 3 characters.
Alternate Message
NA
Message Type
ERROR
Description
An illegal Conn_2D attribute has been inputted on a 1d pit or node object. The Conn_2D attribute is used to automatically link to the 2D. Valid options are available:
- SX
- SXL
- SXZ
- SXG
- SXS
For a detalied description of these options see Section 4.5.1.3 (Connecting Pits and Nodes to 2D Domains) and Table 4.14 (1D model Network (1d_nwk) Attribute Descriptions) of the TUFLOW manual (2010 version).
Suggestions
Specify a valid attribute as per the list above.
| Up |
|---|
 1xxx Messages
|