Difference between revisions of "TUFLOW Message 1125"
Jump to navigation
Jump to search
| Line 7: | Line 7: | ||
|message_desc=For a pump channel the depth values should start at 0 and the flow values should with zero flow. | |message_desc=For a pump channel the depth values should start at 0 and the flow values should with zero flow. | ||
|suggestions=Review the pump flow curve for the channel. | |suggestions=Review the pump flow curve for the channel. | ||
| − | + | ||
| − | |||
| − | |||
|prelink=[[TUFLOW_Message_1124|Message 1124]] | |prelink=[[TUFLOW_Message_1124|Message 1124]] | ||
|uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]] | |uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]] | ||
|nextlink=[[TUFLOW_Message_1126|Message 1126]] | |nextlink=[[TUFLOW_Message_1126|Message 1126]] | ||
}} | }} | ||
Revision as of 16:38, 1 July 2022
TUFLOW Message
WARNING 1125 - yQ curve <curve name> for Pump <channel ID> does not start at zero depth and/or does not finish with zero flow.
First Depth-Flow Values = <depth value, flow value>
Last Depth-Flow Values = <depth value, flow value>
Alternate Message
NA
Message Type
WARNING
Description
For a pump channel the depth values should start at 0 and the flow values should with zero flow.
Suggestions
Review the pump flow curve for the channel.
| Up |
|---|
 1xxx Messages
|