Difference between revisions of "TUFLOW Message 3003"
Jump to navigation
Jump to search
Teegan.Burke (talk | contribs) |
|||
| Line 9: | Line 9: | ||
Note the batch switch will override the tcf command if both are used. | Note the batch switch will override the tcf command if both are used. | ||
| − | + | ||
| − | |||
| − | |||
|prelink=[[TUFLOW_Message_3002|Message 3002]] | |prelink=[[TUFLOW_Message_3002|Message 3002]] | ||
|uplink=[[3xxx_TUFLOW_Messages|3xxx Messages]] | |uplink=[[3xxx_TUFLOW_Messages|3xxx Messages]] | ||
|nextlink=[[TUFLOW_Message_3004|Message 3004]] | |nextlink=[[TUFLOW_Message_3004|Message 3004]] | ||
}} | }} | ||
Revision as of 16:44, 1 July 2022
TUFLOW Message
ERROR 3003: nDevices requested, "a", exceeds nCudaDevices.
Alternate Message
none
Message Type
ERROR
Description
The number of requested GPU devices exceeds the number of usable GPU devices
Suggestions
Ensure that enough GPU devices are available for modelling.
Use "GPU devices IDs" tcf command or "-pu" batch run switch to control the number of requested GPU devices. ID numbering starts at 0 for GPU devices.
Note the batch switch will override the tcf command if both are used.
| Up |
|---|
 3xxx Messages
|