TUFLOW Message 3010: Difference between revisions

From Tuflow
Jump to navigation Jump to search
Content deleted Content added
No edit summary
No edit summary
Line 9: Line 9:
The minimum permissible target timestep allowed for the HPC Solver is set with the 'Timestep Minimum' TCF command, where the default is the minimum of 0.1 seconds or the cell size divided by 200 m/s. This value must be less than the initial timestep value specified for the HPC Solver with the 'Timestep' or 'Timestep Intitial' TCF commands. The timestep can also not be less than 0.000001s.
The minimum permissible target timestep allowed for the HPC Solver is set with the 'Timestep Minimum' TCF command, where the default is the minimum of 0.1 seconds or the cell size divided by 200 m/s. This value must be less than the initial timestep value specified for the HPC Solver with the 'Timestep' or 'Timestep Intitial' TCF commands. The timestep can also not be less than 0.000001s.



|discussion_page=* [[Talk:TUFLOW Message 3010|Discuss Message 3010]]
|link3=''
|link4=''
|prelink=[[TUFLOW_Message_3009|Message 3009]]
|prelink=[[TUFLOW_Message_3009|Message 3009]]
|uplink=[[3xxx_TUFLOW_Messages|3xxx Messages]]
|uplink=[[3xxx_TUFLOW_Messages|3xxx Messages]]

Revision as of 16:46, 1 July 2022

TUFLOW Message
ERROR 3010: minimum permissible dt must be <= initial timestep.

Alternate Message
ERROR 3010: Timestep must be >= 'a'
ERROR 3010: Timestep must be >= 0.000001 s

Message Type
ERROR

Description
The initial timestep for the HPC Solver must be greater than the minimum permissible timestep.

Suggestions
The minimum permissible target timestep allowed for the HPC Solver is set with the 'Timestep Minimum' TCF command, where the default is the minimum of 0.1 seconds or the cell size divided by 200 m/s. This value must be less than the initial timestep value specified for the HPC Solver with the 'Timestep' or 'Timestep Intitial' TCF commands. The timestep can also not be less than 0.000001s.


Up
3xxx Messages