TUFLOW Message 1261: Difference between revisions

|message_desc=Invalid Manning's n value assigned to channel, this will occur for a 0 or negative Manning's n value.

|suggestions=Assign a valid Manning's n value for channel. If material values are defined in the XZ cross-section ("M" flag), the n_or_n_F attribute in the 1d_nwk is a multiplication factor and should be set to 1 (this may be adjusted as part of the calibration process).

|prelink=[[TUFLOW_Message_1258|Message 1258]]

|uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]]