TUFLOW Message 1303: Difference between revisions
Jump to navigation
Jump to search
Content deleted Content added
No edit summary |
No edit summary |
||
| Line 5: | Line 5: | ||
|message_desc=There is an issue with the number of channels and nodes. The most likely cause for this is that there are manually created nodes in the 1d_nwk layer and no 1d_channels. A minimum of 1 channel is required if using manually created 1D nodes. |
|message_desc=There is an issue with the number of channels and nodes. The most likely cause for this is that there are manually created nodes in the 1d_nwk layer and no 1d_channels. A minimum of 1 channel is required if using manually created 1D nodes. |
||
|suggestions=Create a dummy channel in the 1d_nwk layer. |
|suggestions=Create a dummy channel in the 1d_nwk layer. |
||
|discussion_page=* [[Talk:TUFLOW Message 1303|Discuss Message 1303]] |
|||
|link3='' |
|||
|link4='' |
|||
|prelink=[[TUFLOW_Message_1302|Message 1302]] |
|prelink=[[TUFLOW_Message_1302|Message 1302]] |
||
|uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]] |
|uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]] |
||
Revision as of 15:35, 5 July 2022
TUFLOW Message
ERROR 1303 - Invalid channels per node count.
Alternate Message
NA
Message Type
ERROR
Description
There is an issue with the number of channels and nodes. The most likely cause for this is that there are manually created nodes in the 1d_nwk layer and no 1d_channels. A minimum of 1 channel is required if using manually created 1D nodes.
Suggestions
Create a dummy channel in the 1d_nwk layer.
| Up |
|---|
 1xxx Messages
|