TUFLOW Message 2044: Difference between revisions

|suggestions=The 2D cell elevation controls when water can "spill" from the 1D to the 2D. Thick breaklines should be used to ensure that this elevation is correctly set in the 2D. This is documented in the tutorial model for 1D/2D linking here: <u>[[Tutorial_Module04#2D_Breaklines | Tutorial module 4, 2D breaklines]]</u>.<br>

ISIS-TUFLOW models linked via the ISIS-TUFLOW-PIPE link should be simulated with build 2012-05-AE or later where the problem with incorrect linking of nodes has been resolved.

|prelink=[[TUFLOW_Message_2043|Message 2043]]

|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]]