Difference between revisions of "TUFLOW Message 2099"
Jump to navigation
Jump to search
| Line 5: | Line 5: | ||
|message_desc=Ignored repeat application of boundary to 2D cell. This often occurs when a boundary line registers a 2D cell twice. Usually not an issue, but may be an indicator that a boundary line(s) have been digitised incorrectly or were accidentally repeated. | |message_desc=Ignored repeat application of boundary to 2D cell. This often occurs when a boundary line registers a 2D cell twice. Usually not an issue, but may be an indicator that a boundary line(s) have been digitised incorrectly or were accidentally repeated. | ||
|suggestions=Check reason for repeat application of boundary. | |suggestions=Check reason for repeat application of boundary. | ||
| − | + | ||
| − | |||
| − | |||
|prelink=[[TUFLOW_Message_2098|Message 2098]] | |prelink=[[TUFLOW_Message_2098|Message 2098]] | ||
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]] | |uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]] | ||
|nextlink=[[TUFLOW_Message_2100|Message 2100]] | |nextlink=[[TUFLOW_Message_2100|Message 2100]] | ||
}} | }} | ||
Revision as of 13:31, 6 July 2022
TUFLOW Message
CHECK 2099 - Ignored repeat application of boundary to 2D cell.
Alternate Message
NA
Message Type
CHECK
Description
Ignored repeat application of boundary to 2D cell. This often occurs when a boundary line registers a 2D cell twice. Usually not an issue, but may be an indicator that a boundary line(s) have been digitised incorrectly or were accidentally repeated.
Suggestions
Check reason for repeat application of boundary.
| Up |
|---|
 2xxx Messages
|