TUFLOW Message 2204: Difference between revisions
Content deleted Content added
Created page with "{{TUFLOW_Message |tuflow_message=ERROR 2204 - Could not assign ISIS unit node to 2D HX cell. Check that HX line is not also connected to TUFLOW 1D Node. |alt_msg=NA |type=E..." |
No edit summary |
||
Line 5:
|message_desc=TUFLOW could not connect the HX cells to the ISIS unit. This may occur if the HX line is already connected to an ESTRY 1D channel
|suggestions=Check the connectivity of the HX line. Ensure that the HX is either connected to an ESTRY 1D channel with CN lines or an ISIS not directly or with an X connector.
|prelink=[[TUFLOW_Message_2202|Message 2203]]
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]]
| |||