Difference between revisions of "TUFLOW Message 3037"
Jump to navigation
Jump to search
Teegan.Burke (talk | contribs) |
|||
| Line 8: | Line 8: | ||
|suggestions=The Storage Reduction Factor (SRF) can be used to reduce the storage of 2D cells (for example to model hypothetical filling, or reduced storage from buildings). It is a reduction factor, so if a cell has a SRF value of 0.1, then its storage (surface area) is reduced by 10%. | |suggestions=The Storage Reduction Factor (SRF) can be used to reduce the storage of 2D cells (for example to model hypothetical filling, or reduced storage from buildings). It is a reduction factor, so if a cell has a SRF value of 0.1, then its storage (surface area) is reduced by 10%. | ||
| − | |||
| − | |||
| − | |||
|prelink=[[TUFLOW_Message_3036|Message 3036]] | |prelink=[[TUFLOW_Message_3036|Message 3036]] | ||
|uplink=[[3xxx_TUFLOW_Messages|3xxx Messages]] | |uplink=[[3xxx_TUFLOW_Messages|3xxx Messages]] | ||
|nextlink=[[TUFLOW_Message_3038|Message 3038]] | |nextlink=[[TUFLOW_Message_3038|Message 3038]] | ||
}} | }} | ||
Revision as of 15:21, 13 July 2022
TUFLOW Message
ERROR 3037: Cell area factors must be >= 0.0001.
Alternate Message
None
Message Type
ERROR
Description
The value of specified Storage Reduction Factor must be greater than 0.0001 (0.01%).
Suggestions
The Storage Reduction Factor (SRF) can be used to reduce the storage of 2D cells (for example to model hypothetical filling, or reduced storage from buildings). It is a reduction factor, so if a cell has a SRF value of 0.1, then its storage (surface area) is reduced by 10%.
| Up |
|---|
 3xxx Messages
|