Difference between revisions of "TUFLOW Message 2014"
Jump to navigation
Jump to search
| Line 4: | Line 4: | ||
|type=[[ERROR]] | |type=[[ERROR]] | ||
|message_desc=No active 2D cells within Source over Area (SA) inflow polygon. | |message_desc=No active 2D cells within Source over Area (SA) inflow polygon. | ||
| − | |suggestions=Source-Area polygon | + | |suggestions=Source-Area polygon is outside of active model code. Check SA polygon is in the correct location, active model area (2D code) may need to be extended. Check the code polygon has active cells (attribute of 1). |
|prelink=[[TUFLOW_Message_2013|Message 2013]] | |prelink=[[TUFLOW_Message_2013|Message 2013]] | ||
Revision as of 12:14, 6 September 2022
TUFLOW Message
ERROR 2014 - No active cells within SA inflow polygon.
Alternate Message
NA
Message Type
ERROR
Description
No active 2D cells within Source over Area (SA) inflow polygon.
Suggestions
Source-Area polygon is outside of active model code. Check SA polygon is in the correct location, active model area (2D code) may need to be extended. Check the code polygon has active cells (attribute of 1).
| Up |
|---|
 2xxx Messages
|