Direct Rainfall (Rain on Grid) Modelling Guidance: Difference between revisions
Content deleted Content added
Created page with "= Direct Rainfall = Please see <u>[https://www.tuflow.com/library/webinars/#feb2021_direct_rainfall Direct Rainfall (Rain on Grid) Webinar]</u>.<br> <br> = Rainfall Losses an..." |
|||
Line 52:
* Exclude buildings from rainfall polygon and include it with 2d_sa_rf:
** The cut out rainfall from the buildings can be included in the model again with <font color="blue"><tt>Read GIS SA RF</tt></font> command. Digitise a small 2d_sa_rf polygon for each building on the ground where runoff from the building is expected and assign attributes that convert rainfall hyetograph into flow and input it into the model as if it was 2d_sa. Check TUFLOW <u>[[TUFLOW_Example_Models#Boundary_Condition_Options | example model EG03_005.tcf]]</u> on how to setup 2d_sa_rf.
** Most rainfall that falls on buildings collects on the roof and through gutters and downpipes finds its way directly into the sub-surface drainage system. In such case, <font color="blue"><tt>Read GIS SA RF PITS</tt></font> command can be used to feed the water directly into the pits. Every 2d_sa_rf polygon will need to have at least one 1D pit within. If multiple pits are present, the flow from the polygon would be split equally.
<br>
| |||