TUFLOW Message 1178: Difference between revisions
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
{{TUFLOW_Message |
{{TUFLOW_Message |
||
|tuflow_message=ERROR 1178 - Reading channel network data. Check 1d_nwk layer has correct attributes. |
|tuflow_message=ERROR 1178 - Reading channel network data. Check 1d_nwk layer has correct attributes. |
||
|alt_msg=ERROR 1178 - Reading 1D network layer. Check 1d_nwk layer has correct attributes. |
|||
|alt_msg=NA |
|||
|type=[[ERROR]] |
|type=[[ERROR]] |
||
|message_desc=An error has occurred whilst reading 1d network data (1d_nwk). This may occur if the attribute types in the file do not match what TUFLOW is expecting for a 1d_nwk command. |
|message_desc=An error has occurred whilst reading 1d network data (1d_nwk). This may occur if the attribute types in the file do not match what TUFLOW is expecting for a 1d_nwk command. |
||
Revision as of 10:39, 9 December 2022
TUFLOW Message
ERROR 1178 - Reading channel network data. Check 1d_nwk layer has correct attributes.
Alternate Message
ERROR 1178 - Reading 1D network layer. Check 1d_nwk layer has correct attributes.
Message Type
ERROR
Description
An error has occurred whilst reading 1d network data (1d_nwk). This may occur if the attribute types in the file do not match what TUFLOW is expecting for a 1d_nwk command.
Suggestions
Aways use an empty 1d_nwk template file as the GIS entry for 1d_nwk inputs. DO NOT create empty 1d_nwk template files mannually yourself. Use either TCF command, Write Empty MI Files == or Write Empty SHP Files == to create these template files. Also, ensure the layer has the correct attributes and ensure that the Read GIS Network == command is only used for network data, not 1D boundary or table links.
| Up |
|---|
 1xxx Messages
|