Difference between revisions of "TUFLOW Message 3531"
| Line 12: | Line 12: | ||
|prelink=[[TUFLOW_Message_3530|Message 3530]] | |prelink=[[TUFLOW_Message_3530|Message 3530]] | ||
|uplink=[[3xxx_TUFLOW_Messages|3xxx Messages]] | |uplink=[[3xxx_TUFLOW_Messages|3xxx Messages]] | ||
| − | |nextlink=[[ | + | |nextlink=[[TUFLOW_Message_3532|Message 3532]] |
}} | }} | ||
Revision as of 10:45, 16 December 2022
TUFLOW Message
ERROR 3531 - SGS Sample Frequency not set for SGS Approach == Method C.
Alternate Message
N/A
Message Type
ERROR
Description
"SGS Approach == Method C" requires users to set SGS Sample Frequency in the .tcf file (not .tgc). The frequency sets the number of sample points across a cell face, with the square of the number being
the number of SGS sample locations per cell. It expects an odd number starting at 3 (9 cell sample locations).
For example, with SGS Sample Frequency == 11 and cell size of 10m, TUFLOW samples with 1m interval at 11 points along a face including the two face vertexes at both ends.
For Quadtree models, different sample frequencies can be defined for each nesting level, e.g.:
SGS Sample Frequency == 21, 11, 6
Suggestions
Set SGS Sample Frequency in the .tcf file.
| Up |
|---|
 3xxx Messages
|