TUFLOW Message 3546: Difference between revisions
Jump to navigation
Jump to search
Content deleted Content added
No edit summary |
No edit summary |
||
| Line 6: | Line 6: | ||
|suggestions=Turn off SGS materials if depth varying Manning’s n is used. Check the use of SGS materials is intentional when depth varying Manning’s n is not used and review results. |
|suggestions=Turn off SGS materials if depth varying Manning’s n is used. Check the use of SGS materials is intentional when depth varying Manning’s n is not used and review results. |
||
|prelink=[[ |
|prelink=[[TUFLOW_Message_3545|Message 3545]] |
||
|uplink=[[3xxx_TUFLOW_Messages|3xxx Messages]] |
|uplink=[[3xxx_TUFLOW_Messages|3xxx Messages]] |
||
|nextlink=[[ |
|nextlink=[[TUFLOW_Message_3547|Message 3547]] |
||
}} |
}} |
||
Revision as of 10:50, 16 December 2022
TUFLOW Message
ERROR 3546 - SGS Materials is not supported in this build for models with depth varying Mannings n.
Alternate Message
WARNING 3546 - The SGS Materials methodology has changed for the 2022 TUFLOW release and changes in results will occur.
Description
If SGS Materials are on in combination with depth varying Manning’s n value error is issued and the simulation stops. If SGS Materials is enabled without depth varying Manning’s n values warning is issued.
Suggestions
Turn off SGS materials if depth varying Manning’s n is used. Check the use of SGS materials is intentional when depth varying Manning’s n is not used and review results.
| Up |
|---|
 3xxx Messages
|