TUFLOW Message 1066: Difference between revisions
Jump to navigation
Jump to search
Content deleted Content added
No edit summary |
No edit summary |
||
| Line 6: | Line 6: | ||
|suggestions=If using P values, these must be either 1, 2 or 3. |
|suggestions=If using P values, these must be either 1, 2 or 3. |
||
|prelink=[[TUFLOW_Message_1065|Message 1065]] |
|||
|uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]] |
|uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]] |
||
|nextlink=[[TUFLOW_Message_1067|Message 1067]] |
|||
}} |
}} |
||
Revision as of 14:38, 22 December 2022
TUFLOW Message
ERROR 1066 - Invalid P value(s) specified for cross-section ",a," in ",a,
Alternate Message
NA
Message Type
ERROR
Description
For an XZ type cross-section the P values define the position of the XZ point. This indicates whether an XZ point is left bank (1), mainstream (2) or right bank (3). P values must be entered as 1, 2 or 3. For more details see Section 4.6.6.4 Position Flag of TUFLOW manual (2010 version).
Suggestions
If using P values, these must be either 1, 2 or 3.
| Up |
|---|
 1xxx Messages
|