Difference between revisions of "TUFLOW Message 1101"
| Line 7: | Line 7: | ||
Check that the 1d_nwk layer being read in via the <font color="blue"><tt>Read GIS Network </tt></font><font color="red"><tt>== </tt></font> command is a network and not a boundary condition (1d_bc) or cross-section (1d_tab / 1d_xs) layer. | Check that the 1d_nwk layer being read in via the <font color="blue"><tt>Read GIS Network </tt></font><font color="red"><tt>== </tt></font> command is a network and not a boundary condition (1d_bc) or cross-section (1d_tab / 1d_xs) layer. | ||
| − | |||
|uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]] | |uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]] | ||
| − | |||
}} | }} | ||
Revision as of 15:12, 22 December 2022
TUFLOW Message
ERROR 1101 - Less than the mandatory 20 1d_nwk attributes found
Alternate Message
ERROR 1101 - Less than the mandatory 10 1d_pit attributes found.
Message Type
ERROR
Description
1D network layers should have the GIS attributes as described in Table 4.14 1D Model Network (1d_nwk) Attribute Descriptions of the TUFLOW Manual (2010 version).
Suggestions
Check the GIS attributes match those described in the TUFLOW manual or a 1d_nwk_empty layer created with the latest TUFLOW release. If it seems to be correct, recreate the layer from scratch using a 1d_nwk empty layer created with the latest TUFLOW release.
Check that the 1d_nwk layer being read in via the Read GIS Network == command is a network and not a boundary condition (1d_bc) or cross-section (1d_tab / 1d_xs) layer.
| Up |
|---|
 1xxx Messages
|