Difference between revisions of "TUFLOW Message 1253"
Jump to navigation
Jump to search
| Line 14: | Line 14: | ||
* Check if cross-sections are both in the same location | * Check if cross-sections are both in the same location | ||
| − | + | ||
|uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]] | |uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]] | ||
| − | |||
}} | }} | ||
Revision as of 15:58, 22 December 2022
TUFLOW Message
WARNING 1253 - Unused 1d_ta line with attributes: ",a,",
Alternate Message
NA
Message Type
WARNING
Description
Unused data in table links (Read GIS Table Links == ). A unused link to tabular input has been found, tabular data can include cross-section profiles, cross-section hydraulic parameters, nodal surface areas or bridge loss coefficients.
This can occur if:
- A 1d_ta element with three or more vertices isn't snapped to a 1D network (1d_nwk) node
- A 1d_ta element with two vertices does not intersect 1D network (1d_nwk) line
- A channel in the 1D network has both end and mid cross sections
- Two or more 1d_ta elements exist in the same location
Suggestions
- Check if the 1d_ta object is linked to the 1D network (either snapped for a 1d_ta object with 3 or more vertices or just intersecting if the 1d_ta object has only 2 vertices)
- Check if the 1D network channel has both mid- and end- cross-sections. If both mid- and end- sections exist, TUFLOW will ignore the end-cross-sections in favour of the mid-cross-sections (Refer to the Mid Cross-Section and End Cross-section Chapters of the TUFLOW Manual)
- Check if cross-sections are both in the same location
| Up |
|---|
 1xxx Messages
|