Difference between revisions of "TUFLOW Message 2085"
| Line 8: | Line 8: | ||
|suggestions=Specify an interpolation method for cell sides (<font color="blue"><tt>Bed Resistance Cell Sides </tt></font><font color="red"><tt>== </tt></font>) if using <font color="blue"><tt>Read MID</tt></font> commands to define roughness. Or use GIS inputs (<font color="blue"><tt>Read GIS MAT or FRIC </tt></font><font color="red"><tt>== </tt></font> ) with <font color="blue"><tt>Bed Resistance Cell Sides </tt></font><font color="red"><tt>== </tt></font><font color="black"><tt>INTERROGATE</tt></font>. | |suggestions=Specify an interpolation method for cell sides (<font color="blue"><tt>Bed Resistance Cell Sides </tt></font><font color="red"><tt>== </tt></font>) if using <font color="blue"><tt>Read MID</tt></font> commands to define roughness. Or use GIS inputs (<font color="blue"><tt>Read GIS MAT or FRIC </tt></font><font color="red"><tt>== </tt></font> ) with <font color="blue"><tt>Bed Resistance Cell Sides </tt></font><font color="red"><tt>== </tt></font><font color="black"><tt>INTERROGATE</tt></font>. | ||
| − | + | ||
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]] | |uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]] | ||
| − | |||
}} | }} | ||
Latest revision as of 12:00, 23 December 2022
TUFLOW Message
ERROR 2085 - Read MID Mat or Read MID CnM cannot be used with Bed Resistance Cell Sides == INTERROGATE
Alternate Message
ERROR 2085 - Read MID Grid command cannot be used with Bed Resistance Cell Sides == INTERROGATE
Message Type
ERROR
Description
Read MID Mat, Read MID CnM or Read MID Grid .tgc commands cannot be used with Bed Resistance Cell Sides == INTERROGATE .tcf command. Specify Bed Resistance Cell Sides == AVERAGE n or Bed Resistance Cell Sides == AVERAGE M or Bed Resistance Cell Sides == MAXIMUM n in the .tcf file.
Bed Resistance Cell Sides == INTERROGATE is the default in the TUFLOW (as of TUFLOW Build 2007-07-AA), applies the exact value from the material polygons at each cell side. With the Read MID commands a value is inputted for each cell and value at cell side calculated using either average n, average M (1/n) or maximum n. The two approaches are therefore incompatible.
Suggestions
Specify an interpolation method for cell sides (Bed Resistance Cell Sides == ) if using Read MID commands to define roughness. Or use GIS inputs (Read GIS MAT or FRIC == ) with Bed Resistance Cell Sides == INTERROGATE.
| Up |
|---|
 2xxx Messages
|