Tutorial Module07 Archive: Difference between revisions
Content deleted Content added
Created page with "<ol> =Introduction= In this module we will incorporate within the tutorial model a more detailed representation of the proposed development first introduced in Tutorial Modu..." |
No edit summary |
||
Line 237:
=Run the Simulation=
Using your preferred method for starting TUFLOW, run the newly created '''M07_5m_~s1~_001.tcf'''. Please refer to [[
In this tutorial we are using a batch file to run simulations. The command line in our batch file will be similar to that used in Module 6:<br>
{| class="wikitable "
Line 246:
<tt>%RUN% <font color="red">-s1 DEV </font> M07_5m_~s1~_001.tcf</tt><br>
|}
If the model fails to start correctly please refer to the <u>[[
=Review Check Files=
Line 303:
If the TUFLOW simulation fails to start TUFLOW will output the error in a number of locations. Firstly, check the Console Window or the TUFLOW Log File (.tlf) (located in the '''TUFLOW\runs\log\''' folder with the name '''M07_5m_DEV_001.tlf'''). This file can be opened in a text editor and the error is generally located at the end of the file. You can however search for "Error" if you cannot see the error. In most cases there is also a spatial location for the error message (if the error reported in the log file is prefixed by XY:). To check the location of the geographic errors, open the '''M07_5m_DEV_001_messages.mif''' or '''M07_5m_DEV_001_messages_P.shp''' file in your GIS package.<br>
<br>
This section contains links to some possible problems that may occur when progressing through the fourth tutorial module. If you experience an issue that is not detailed, please email support@tuflow.com or add and describe the problem on the <u>[[Talk%
*[[Save_Date_Error|Save date of .tab file is later than .mif or .mid]]
Line 318:
===Model Setup===
To switch on the HPC solver with scenario control, please see <u>[[
To run the HPC solver using another .tcf file, simply perform the following steps:
<ol>
Line 340:
</ol>
<br>
''TIP: To switch on the HPC solver via scenario control commands, please see the <u>[[
:''Also, to learn how to optimise a HPC simulation to achieve the fastest simulation speed please complete <u>[[
==Results==
Using the methods described above in the <u>[[
* Check the simulation logs in the DOS window, .tlf and .hpc.tlf log files.
* View the results in your preferred package.
| |||