Difference between revisions of "TUFLOW Message 2120"
Jump to navigation
Jump to search
| Line 6: | Line 6: | ||
|suggestions=Specify a timestep for each 2D domain in the model and/or use a global timestep. | |suggestions=Specify a timestep for each 2D domain in the model and/or use a global timestep. | ||
| − | + | ||
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]] | |uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]] | ||
| − | |||
}} | }} | ||
Latest revision as of 14:07, 2 February 2023
TUFLOW Message
ERROR 2120 - There is no global timestep or a specific timestep for 2D domain.
Alternate Message
NA
Message Type
ERROR
Description
There is no global timestep or a specific timestep for 2D domain. The global timestep is specified by using Timestep == outside a Start 2D Domain command block. For each 2D domain, as defined in the .tcf with Start 2D Domain and End 2D Domain, a timestep is specfied with a Timestep == command. If no specific timestep is applied to a 2D domain, the global timestep is used.
Suggestions
Specify a timestep for each 2D domain in the model and/or use a global timestep.
| Up |
|---|
 2xxx Messages
|