TUFLOW Message 3025: Difference between revisions
Jump to navigation
Jump to search
Content deleted Content added
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
{{TUFLOW_Message |
{{TUFLOW_Message |
||
|tuflow_message=ERROR 3025 |
|tuflow_message=ERROR 3025 - Roughness height must be >= 0. |
||
<br> |
<br> |
||
|alt_msg= |
|alt_msg=NA<br> |
||
|type=[[ERROR]] |
|type=[[ERROR]] |
||
|message_desc=Materials may use either fixed mannings, depth-varying mannings, or log-law roughness formulations for bed resistance. |
|||
|message_desc=The roughness height "Ks" required for specifying the bed resistance with the theoretically derived log law for shallow flows must be greater than or equal to 0.0. |
|||
To utilise fixed mannings or depth-varying mannings, the log-law roughness must be set to zero (default). |
|||
|suggestions= |
|||
To utilise log-law roughness, the roughness height must be greater than zero. |
|||
A roughness height of less than zero is not permitted. |
|||
|suggestions=Ensure that all materials that utilise log-law roughness have positive roughness heights. |
|||
|prelink=[[TUFLOW_Message_3024|Message 3024]] |
|prelink=[[TUFLOW_Message_3024|Message 3024]] |
||
Revision as of 16:06, 2 March 2023
TUFLOW Message
ERROR 3025 - Roughness height must be >= 0.
Alternate Message
NA
Message Type
ERROR
Description
Materials may use either fixed mannings, depth-varying mannings, or log-law roughness formulations for bed resistance.
To utilise fixed mannings or depth-varying mannings, the log-law roughness must be set to zero (default).
To utilise log-law roughness, the roughness height must be greater than zero.
A roughness height of less than zero is not permitted.
Suggestions
Ensure that all materials that utilise log-law roughness have positive roughness heights.
| Up |
|---|
 3xxx Messages
|