TUFLOW Message 3036: Difference between revisions
Jump to navigation
Jump to search
Content deleted Content added
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
{{TUFLOW_Message |
{{TUFLOW_Message |
||
|tuflow_message=ERROR 3036 |
|tuflow_message=ERROR 3036 - Hydrograph weight data not in range [0 ... 6.5535]. |
||
<br> |
<br> |
||
|alt_msg= |
|alt_msg=NA<br> |
||
|type=[[ERROR]] |
|type=[[ERROR]] |
||
|message_desc=It is possible to apply spatial weighting factors when cells reference nearby hyteograph rainfall data records. |
|||
|message_desc=Hydrographs were not accepted by the HPC solver. Prior to 2020-10-AA release this error was caused by multiplication factors f1 and f2 in the 2d_rf layer other than 1. |
|||
In HPC these are discretised as integers, and the original floating point weights must be in range 0 to 6.5535. |
|||
|suggestions=Use the latest TUFLOW release. If multiplication factors other than 1 are used and TUFLOW version cannot be updated, multiplication should be applied to the source hydrographs rather than the factors f1 and f2.<br> |
|||
| ⚫ | |||
|suggestions=If certain hyteograph records are being scaled with factors greater than one, then consider increasing the original source data for |
|||
| ⚫ | |||
|prelink=[[TUFLOW_Message_3035|Message 3035]] |
|prelink=[[TUFLOW_Message_3035|Message 3035]] |
||
Revision as of 16:28, 2 March 2023
TUFLOW Message
ERROR 3036 - Hydrograph weight data not in range [0 ... 6.5535].
Alternate Message
NA
Message Type
ERROR
Description
It is possible to apply spatial weighting factors when cells reference nearby hyteograph rainfall data records.
In HPC these are discretised as integers, and the original floating point weights must be in range 0 to 6.5535.
Suggestions
If certain hyteograph records are being scaled with factors greater than one, then consider increasing the original source data for
these hyteographs so that the weighting values can be decreased.
Please contact support@tuflow.com for further assistance.
| Up |
|---|