Tuflow

TUFLOW Check Files: Difference between revisions

Browse history interactively
← Older editNewer edit →
Content deleted Content added
VisualWikitext
Line 107:
! colspan="2" | Vector Check Files
|-
| [[Check_Files_1d_bc_check | _1d_bc_check<br>_1d_bc_check_P]]|| GIS layer of the final 1D boundary conditions (BC). If no boundary conditions were specified, empty files are written that can be used to set up a new layer.
|-
| [[Check_Files_1d_hydroprop | _hydroprop_check<br>_hydroprop_check_L]]|| Contains the hydraulic properties at the top of the hydraulic properties tables as attributes of the 1D channels. Other information such as the primary Manning’s n is also provided. Very useful for carrying out quality control checks on the 1D channels.
|-
| [[Check_Files_1d_inverts | _inverts_check<br>_inverts_check_P]]|| Contains the inverts of the 1D nodes and at the ends of the 1D channels. Very useful for checking for smooth transitions from one channel to another and with the nodes.
|-
| [[Check_Files_1d_IWL | _iwl_check<br>_iwl_check_P]]|| GIS layer of the initial water levels at the 1D model nodes.
|-
| [[Check_Files_1d_mhc | _mhc_check<br>_mhc_check_P]]|| GIS layer of manholes including any automatically created manholes.
|-
| [[Check_Files_1d_nwk_C | _nwk_C_check<br>_nwk_C_check_L]]|| GIS layer of the final 1D model network. This check layer contains the channels of the 1D domain only. The _nwk_N_check layer contains the nodes.<br>
The layers lines are coloured based on the channel type (available for the .mid/.mif format only).<br>
Any generated pit channels are shown as a small channel flowing from north to south into the pit node. The upstream pit channel node that is generated is also shown. The length of the pit channel is controlled by <font color="blue"><tt>Pit Channel Offset </tt></font> <font color="red"><tt>==</tt></font> command.
|-
| [[Check_Files_1d_nwk_N | _nwk_N_check<br>_nwk_N_check_P]]|| GIS layer of the final 1D model network. This check layer contains the nodes of the 1D domain only. The _nwk_C_check layer contains the channels.<br>
The node symbology is displayed as a red circle for nodes connected to two or more channels, a larger magenta circle for nodes connected to one channel and a large yellow square for nodes not connected to a channel (available for the .mid/.mif format only). '''This is very useful for checking for channel ends or nodes that are not snapped.'''<br>
The top and bottom elevations of the NA table at nodes is now shown using the Upstream_Invert and Downstream_Invert attributes.
|-
| [[ Check_Files_1d_pit_A |_pit_A_check<br>_pit_A_check_P]]|| GIS layer of the 1D pit details.
|-
| [[Check_Files_1d_WLLo | _WLLo_check<br>_WLLo_check_L<br>_xWLLo_check<br>_xWLLo_check_L]]|| GIS layer of all the WLL objects read. The attributes provide information on which nodes that area associated with, etc. <br>
The _WLLo_check layers are written for ESTRY 1D domains, whereas the _xWLLo_check layers are written for external 1D domains, such as Flood Modeller or XP-SWMM.
|-
| [[Check_Files_1d_WLLp | _WLLp_check<br>_WLLp_check_P<br>_xWLLp_check<br>_xWLLp_check_P]]|| GIS layer of where the points were generated along the WLLs. These points can then be used for <font color="blue"><tt>Read GIS WLL Points</tt></font> <font color="red"><tt>==</tt></font> command.<br>
The _WLLp_check layers are written for ESTRY 1D domains, whereas the _xWLLp_check layers are written for external 1D domains, such as Flood Modeller or XP-SWMM.
|-
| [[Check_Files_1d_xsl | _xsl_check<br>_xsl_check_L]]|| GIS layer containing tabular data as read from 1d_xs input layers. Contains the XS ID and other useful information on the cross-section properties, etc. Refer also to [[Check_Files_1d_ta_tables | _ta_tables_check]].
|-
| [[Check_Files_1d_x1d_chans | _x1d_chans_check<br>_x1d_chans_check_L]]|| GIS layer containing the location of 1D channels from an external 1D domain.
|-
| [[Check_Files_1d_x1d_nodes | _x1d_nodes_check<br>_x1d_nodes_check_P]]|| GIS layer containing the location of 1D nodes from an external 1D domain.
|}
 
Retrieved from "https://wiki.tuflow.com/TUFLOW_Check_Files"