Difference between revisions of "TUFLOW Message 1076"
Jump to navigation
Jump to search
| Line 3: | Line 3: | ||
|alt_msg=NA | |alt_msg=NA | ||
|type=[[CHECK]] | |type=[[CHECK]] | ||
| − | |message_desc=TUFLOW creates elevation vs hydraulic properties table for 1d channel | + | |message_desc=When TUFLOW creates elevation vs hydraulic properties table for 1d channel, user can Optionally use the 'Z_Increment' and the 'Z_Maximum' attributes in the 1d_xs layer to specify the interval and the maximum elevation of the table. However, the default upper limit of the table data size is 100 and this check message indicate the data size exceeded the limit and was capped to 100. |
|suggestions=Check the 'Z_Increment' and 'Z_Maximum' values specified in the cross section input file. | |suggestions=Check the 'Z_Increment' and 'Z_Maximum' values specified in the cross section input file. | ||
|uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]] | |uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]] | ||
}} | }} | ||
Revision as of 14:36, 12 February 2024
TUFLOW Message
CHECK 1076 - ",a," processed data levels determined for ",a,". Limiting to 100.
Alternate Message
NA
Message Type
CHECK
Description
When TUFLOW creates elevation vs hydraulic properties table for 1d channel, user can Optionally use the 'Z_Increment' and the 'Z_Maximum' attributes in the 1d_xs layer to specify the interval and the maximum elevation of the table. However, the default upper limit of the table data size is 100 and this check message indicate the data size exceeded the limit and was capped to 100.
Suggestions
Check the 'Z_Increment' and 'Z_Maximum' values specified in the cross section input file.
| Up |
|---|
 1xxx Messages
|