|
=== TUFLOW Control File (TCF) ===
The TCF file references all the control files, specifies time and output controls.<br>
In the <u>[[#Convert_XPSWMM_Model_to_Recommended_TUFLOW_Structure | Convert XPSWMM Model to Recommended TUFLOW Structure]]</u> section, the <u>[[Convert_TUFLOW_Model_GIS_Format |Convert TUFLOW Model GIS Format]]</u> processing tool utilizes the TUFLOW control files generated by XPSWMM to construct the TUFLOW SWMM model control files. During this process, the tool updates the commands within the TUFLOW control files to align with the requirements of a TUFLOW SWMM model. However, since the original control files were intended for use with XPSWMM, they lack the commands required to execute a TUFLOW simulation. Additionally, these files often contain unnecessary and/or outdated commands.<br>
In the section above, the TBC was edited to reflect the model updates implemented during the conversion process, while no updates were necessary for the TGC. However, the TCF requires updating to ensure the TUFLOW SWMM model runs smoothly.
<ol>
<li> Remove or comment out the commands listed below.
{|
|style="width: 50%"| <font color="blue"><tt>Check MI Save Date </tt></font> <font color="red"><tt>== </tt></font>
|<font color="blue"><tt>Mass Balance Output Interval (s) </tt></font> <font color="red"><tt>== </tt></font>
|-
|<font color="blue"><tt>MI Projection </tt></font> <font color="red"><tt>== </tt></font>
|<font color="blue"><tt>CSV Time </tt></font> <font color="red"><tt>== </tt></font>
|-
|<font color="blue"><tt>MI Projection Check </tt></font> <font color="red"><tt>== </tt></font>
|<font color="blue"><tt>Viscosity Formulation </tt></font> <font color="red"><tt>== </tt></font>
|-
|<font color="blue"><tt>Timestep (s) </tt></font> <font color="red"><tt>== </tt></font>
|<font color="blue"><tt>Viscosity Coefficient </tt></font> <font color="red"><tt>== </tt></font>
|-
|<font color="blue"><tt>Cell Wet/Dry Depth </tt></font> <font color="red"><tt>== </tt></font>
|<font color="blue"><tt>SX ZC Check </tt></font> <font color="red"><tt>== </tt></font>
|-
|<font color="blue"><tt>Read GIS XP Nodes </tt></font> <font color="red"><tt>== </tt></font>
|<font color="blue"><tt>SX Storage Approach </tt></font> <font color="red"><tt>== </tt></font>
|-
|<font color="blue"><tt>Simulations Log Folder </tt></font> <font color="red"><tt>== </tt></font>
|<font color="blue"><tt>HX ZC Check </tt></font> <font color="red"><tt>== </tt></font>
|-
|<font color="blue"><tt>Store Maximums and Minimums </tt></font> <font color="red"><tt>== </tt></font>
|<font color="blue"><tt>Mass Balance Corrector </tt></font> <font color="red"><tt>== </tt></font>
|-
|<font color="blue"><tt>Mass Balance Output </tt></font> <font color="red"><tt>== </tt></font>
|}
<li> Make the following updates:
{|class="wikitable"
! Original Command
! Updated Command
|-
|<font color="blue"><tt>GPKG Projection </tt></font> <font color="red"><tt>== </tt></font> <font color="black"><tt>1D2D_Urban_001_proj</tt></font>
|<font color="blue"><tt>GPKG Projection </tt></font> <font color="red"><tt>== </tt></font> <font color="black"><tt>??</tt></font>
|-
|<font color="blue"><tt>Write Check Files </tt></font> <font color="red"><tt>== </tt></font> <font color="black"><tt>OFF</tt></font>
|<font color="blue"><tt>Write Check Files </tt></font> <font color="red"><tt>== </tt></font> <font color="black"><tt>..\check\</tt></font>
|-
|<font color="blue"><tt>Output Folder </tt></font> <font color="red"><tt>== </tt></font> <font color="black"><tt>..\results\Output </tt></font>
|<font color="blue"><tt>Output Folder </tt></font> <font color="red"><tt>== </tt></font> <font color="black"><tt>..\results\</tt></font>
|-
|<font color="blue"><tt>Log Folder </tt></font> <font color="red"><tt>== </tt></font> <font color="black"><tt>log\Log </tt></font>
|<font color="blue"><tt>Output Folder </tt></font> <font color="red"><tt>== </tt></font> <font color="blue"><tt>log</tt></font>
|-
|<font color="blue"><tt>Map Output Data Types </tt></font> <font color="red"><tt>== </tt></font> <font color="black"><tt>qVdhZ0 </tt></font>
|<font color="blue"><tt>Map Output Data Types </tt></font> <font color="red"><tt>== </tt></font> <font color="black"><tt>q V d h Z0</tt></font>
|-
|<font color="blue"><tt>Map Output Format </tt></font> <font color="red"><tt>== </tt></font> <font color="blue"><tt>XMDF </tt></font>
|<font color="blue"><tt>Map Output Format </tt></font> <font color="red"><tt>== </tt></font> <font color="blue"><tt>XMDF TIF</tt></font>
|}
<li> Add the following commands:<br>
<font color="blue"><tt>Tutorial Model </tt></font> <font color="red"><tt>== </tt></font> <font color="blue"><tt>ON </tt></font> <font color="green"><tt> ! Required command to run this tutorial model licence free</tt></font><br>
<font color="blue"><tt>GIS Format </tt></font> <font color="red"><tt>== </tt></font> <font color="blue"><tt>GPKG </tt></font> <font color="green"><tt> ! Specify GPKG as the output format for all GIS files</tt></font><br>
<font color="blue"><tt>Solution Scheme </tt></font> <font color="red"><tt>== </tt></font> <font color="blue"><tt>HPC </tt></font> <font color="green"><tt> ! Heavily Parallelised Compute, uses adaptive timestepping</tt></font><br>
<font color="blue"><tt>Hardware </tt></font> <font color="red"><tt>== </tt></font> <font color="blue"><tt>CPU </tt></font> <font color="green"><tt> ! Replace with "Hardware == GPU" if GPU available </tt></font><br>
<font color="blue"><tt>Start Time </tt></font> <font color="red"><tt>== </tt></font> <font color="black"><tt>0 </tt></font> <font color="green"><tt> ! Specifies the simulation start time (0 hours) </tt></font><br>
<font color="blue"><tt>End Time </tt></font> <font color="red"><tt>== </tt></font> <font color="black"><tt>3 </tt></font> <font color="green"><tt> ! Specifies the simulation end time (3 hours)</tt></font><br>
<font color="blue"><tt>TIF Map Output Interval </tt></font> <font color="red"><tt>== </tt></font> <font color="black"><tt>0 </tt></font> <font color="green"><tt> ! Outputs only maximums for grids</tt></font><br>
<li> Add the following command to reference the TUFLOW SWMM Control File (TSCF):<br>
<font color="blue"><tt>SWMM Control File </tt></font> <font color="red"><tt>== </tt></font> <font color="black"><tt>..\model\1D2D_Urban_001.tscf</tt></font>
<li> Save the TCF.
<br><br>
'''<font color="red> Video </font>'''
<br>
</ol>
=== Optional: Format TUFLOW Control Files ===
|