Difference between revisions of "XPSWMM Conversion TUFLOW Geometry Control File (TGC)"

From Tuflow
Jump to navigation Jump to search
(Created page with "== TUFLOW Geometry Control File (TGC) == The TUFLOW Geometry Control File (TGC) contains a series of commands that build the geometry model. At its minimum, the TGC contains:...")
 
Line 1: Line 1:
 
== TUFLOW Geometry Control File (TGC) ==
 
== TUFLOW Geometry Control File (TGC) ==
The TUFLOW Geometry Control File (TGC) contains a series of commands that build the geometry model. At its minimum, the TGC contains:
+
The TUFLOW Geometry Control File (TGC) contains a series of commands that build the 2D geometry model. At its minimum, the TGC contains:
 
:* Information on the size and orientation of the grid;
 
:* Information on the size and orientation of the grid;
 
:* Grid cell codes (whether cells are active or inactive);
 
:* Grid cell codes (whether cells are active or inactive);
Line 9: Line 9:
 
<br><br>
 
<br><br>
  
 
+
{{Tips Navigation
 +
|uplink=[[XPSWMM_Conversion_TUFLOW_Control_File_(TCF) | TUFLOW Control File (TCF)]]]]
 +
}}
 
{{Tips Navigation
 
{{Tips Navigation
 
|uplink=[[XPSWMM_to_TUFLOW-SWMM#TUFLOW_Control_File_Updates| Back to XPSWMM to TUFLOW Conversion Page]]
 
|uplink=[[XPSWMM_to_TUFLOW-SWMM#TUFLOW_Control_File_Updates| Back to XPSWMM to TUFLOW Conversion Page]]
 
}}
 
}}

Revision as of 11:01, 16 February 2024

TUFLOW Geometry Control File (TGC)

The TUFLOW Geometry Control File (TGC) contains a series of commands that build the 2D geometry model. At its minimum, the TGC contains:

  • Information on the size and orientation of the grid;
  • Grid cell codes (whether cells are active or inactive);
  • Bed / ground elevations; and
  • Bed material type or flow resistance value.


The TGC requires no updates; however, it is recommended to review the TGC before running the simulation to ensure all commands are correct.

Up
Go-up.png TUFLOW Control File (TCF)]]
Up
Go-up.png Back to XPSWMM to TUFLOW Conversion Page