TUFLOW HR Output: Difference between revisions
Content deleted Content added
Line 26:
If this command is omitted, the default output resolution is set as the SGS sampling distance.
=Water Level/Depth Interpolation Method =
For the HR output the water level at each HR output location is interpolated from the computed 2D water levels. The depth is the difference between the interpolated water level and the sub-grid elevation. This differs from the standard depth output which calculates the depths at cell centres and corners first, then interpolate the depths to the standard output grid locations(default is half the cell size). The difference in the interpolation process is illustrated below.
[[File:Sgs_std_output.png]] [[File:Sgs_hr_output.png]]
interpolated from the surrounding SGS sampled elevations.
*''under construction''
=Interpolation near Thin Breakline =
*''under construction''
| |||