Difference between revisions of "XPSWMM Conversion TUFLOW Geometry Control File (TGC)"
Jump to navigation
Jump to search
| Line 6: | Line 6: | ||
:* Bed material type or flow resistance value. | :* Bed material type or flow resistance value. | ||
| − | The TGC | + | The TGC does not require any updates; however, it is recommended to review the TGC (e.g. '''1D2D_Urban_001.tgc''') before running the simulation to ensure all commands are correct. |
<br><br> | <br><br> | ||
Revision as of 13:57, 1 March 2024
TUFLOW Geometry Control File (TGC)
The TUFLOW Geometry Control File (TGC) contains a series of commands that build the 2D geometry model. At its minimum, the TGC contains:
- Information on the size and orientation of the grid;
- Grid cell codes (whether cells are active or inactive);
- Bed / ground elevations; and
- Bed material type or flow resistance value.
The TGC does not require any updates; however, it is recommended to review the TGC (e.g. 1D2D_Urban_001.tgc) before running the simulation to ensure all commands are correct.
| Up |
|---|
 Continue to Next Step: "TUFLOW Control File (TCF)"
|
| Up |
|---|
| Back to Main XPSWMM to TUFLOW Conversion Page
|