Difference between revisions of "TUFLOW Message 2904"

From Tuflow
Jump to navigation Jump to search
(Created page with "{{TUFLOW_Message |tuflow_message=WARNING 2904 - Failed to set up Mass Balance Output Interval. Set to "End Time - Start Time". Use the "Mass Balance Output Interval ==" comman...")
 
Line 3: Line 3:
 
|alt_msg=NA
 
|alt_msg=NA
 
|type=[[WARNING]]
 
|type=[[WARNING]]
|message_desc=
+
|message_desc= The model has failed to set up a mass balance output interval and will instead use an interval of the end time, minus the start time. If you would like a more frequent interval, see the below suggestion.
  
 
<br>
 
<br>
  
|suggestions= Use the "Mass Balance Output Interval ==" command, or one of the "Map Output Interval" and the "Time Series Output Interval" command.
+
|suggestions= Use one of the following commands:
 +
*"Mass Balance Output Interval =="  
 +
*"Map Output Interval == "  
 +
*"Time Series Output Interval =="  
 +
 
 
<br><br>
 
<br><br>
  
 
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]]
 
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]]
 
}}
 
}}

Revision as of 23:05, 30 July 2024

TUFLOW Message
WARNING 2904 - Failed to set up Mass Balance Output Interval. Set to "End Time - Start Time". Use the "Mass Balance Output Interval ==" command, or one of the "Map Output Interval" and the "Time Series Output Interval" command.

Alternate Message
NA

Message Type
WARNING

Description
The model has failed to set up a mass balance output interval and will instead use an interval of the end time, minus the start time. If you would like a more frequent interval, see the below suggestion.


Suggestions
Use one of the following commands:

  • "Mass Balance Output Interval =="
  • "Map Output Interval == "
  • "Time Series Output Interval =="




Up
Go-up.png 2xxx Messages