Difference between revisions of "TUFLOW Message 1103"
Jump to navigation
Jump to search
| Line 3: | Line 3: | ||
|alt_msg=NA | |alt_msg=NA | ||
|type=[[ERROR]] | |type=[[ERROR]] | ||
| − | |message_desc=If using the extended (1d_nwke) attributes, which allows automatic weir over the top of structures, the additional GIS attributes | + | |message_desc=If using the extended (1d_nwke) attributes, which allows automatic weir over the top of structures, must use the additional GIS attributes. Refer to the <u>[https://docs.tuflow.com/classic-hpc/manual/latest/ TUFLOW Manual]</u> for more information. |
|suggestions=Ensure GIS attributes for a 1d_nwke layer match with the empty file (1d_nwke_empty) as written by TUFLOW. | |suggestions=Ensure GIS attributes for a 1d_nwke layer match with the empty file (1d_nwke_empty) as written by TUFLOW. | ||
|uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]] | |uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]] | ||
}} | }} | ||
Latest revision as of 08:57, 23 September 2024
TUFLOW Message
ERROR 1103 - Must have ten extra attributes appended to 1d_nwk layer to use the weir over the top option.
Alternate Message
NA
Message Type
ERROR
Description
If using the extended (1d_nwke) attributes, which allows automatic weir over the top of structures, must use the additional GIS attributes. Refer to the TUFLOW Manual for more information.
Suggestions
Ensure GIS attributes for a 1d_nwke layer match with the empty file (1d_nwke_empty) as written by TUFLOW.
| Up |
|---|
 1xxx Messages
|