Difference between revisions of "TUFLOW Message 1422"
| Line 4: | Line 4: | ||
ERROR 1422 - No loss vs height (LC or BG) table or 1d_nwk Form_Loss attribute specified for BB bridge channel <channel id> | ERROR 1422 - No loss vs height (LC or BG) table or 1d_nwk Form_Loss attribute specified for BB bridge channel <channel id> | ||
|type=[[ERROR]] | |type=[[ERROR]] | ||
| − | |message_desc=No loss vs height table is specified for a bridge channel (this can occur for a "B" or "BB" type bridge). Please refer to the TUFLOW | + | |message_desc=No loss vs height table is specified for a bridge channel (this can occur for a "B" or "BB" type bridge). Please refer to the <u>[https://docs.tuflow.com/classic-hpc/manual/latest/ TUFLOW Manual]</u> for more details on modelling bridges. |
|suggestions=Specify a loss table via a 1d_ta tables or via the 1d_nwk Form_Loss attribute. <br> | |suggestions=Specify a loss table via a 1d_ta tables or via the 1d_nwk Form_Loss attribute. <br> | ||
Due to the potential for a divide by zero, a zero loss value can not be specified on the 1d_nwk layer if no LC table has been linked. A minimum loss value of 0.01 for B bridges or 0.001 for BB bridges will need to be specified in the 1d_nwk Form_Loss attribute. | Due to the potential for a divide by zero, a zero loss value can not be specified on the 1d_nwk layer if no LC table has been linked. A minimum loss value of 0.01 for B bridges or 0.001 for BB bridges will need to be specified in the 1d_nwk Form_Loss attribute. | ||
Latest revision as of 09:57, 23 September 2024
TUFLOW Message
ERROR 1422 - No loss vs height (LC or BG) table or 1d_nwk Form_Loss attribute specified for B bridge channel <channel id>
Alternate Message
ERROR 1422 - No pier losses via LC table or 1d_nwk Form_Loss attribute specified for BB bridge channel <channel id>
ERROR 1422 - No loss vs height (LC or BG) table or 1d_nwk Form_Loss attribute specified for BB bridge channel <channel id>
Message Type
ERROR
Description
No loss vs height table is specified for a bridge channel (this can occur for a "B" or "BB" type bridge). Please refer to the TUFLOW Manual for more details on modelling bridges.
Suggestions
Specify a loss table via a 1d_ta tables or via the 1d_nwk Form_Loss attribute.
Due to the potential for a divide by zero, a zero loss value can not be specified on the 1d_nwk layer if no LC table has been linked. A minimum loss value of 0.01 for B bridges or 0.001 for BB bridges will need to be specified in the 1d_nwk Form_Loss attribute.
| Up |
|---|
 1xxx Messages
|