TUFLOW Message 2204: Difference between revisions
Content deleted Content added
No edit summary |
No edit summary |
||
Line 1:
{{TUFLOW_Message
|tuflow_message=ERROR 2204 - Could not assign Flood Modeller unit node to 2D HX cell. Check that HX line is not also connected to TUFLOW 1D Node.
|alt_msg=ERROR 2204 - Could not assign ISIS unit node to 2D HX cell. Check that HX line is not also connected to TUFLOW 1D Node.
|type=[[ERROR]]
|message_desc=TUFLOW could not connect the HX cells to the Flood Modeller unit. This may occur if the HX line is already connected to an ESTRY 1D channel
| |||