TUFLOW Message 2817: Difference between revisions
Jump to navigation
Jump to search
Content deleted Content added
Ellis Symons (talk | contribs) No edit summary |
No edit summary |
||
| Line 5: | Line 5: | ||
|type=[[ERROR]] |
|type=[[ERROR]] |
||
|message_desc=There was an error reading in the 2d_bc GIS layer attributes. This is typically caused by incorrect attribute types or the number of attributes. |
|message_desc=There was an error reading in the 2d_bc GIS layer attributes. This is typically caused by incorrect attribute types or the number of attributes. |
||
|suggestions=Ensure that the 2d_bc GIS layer that is causing the issue has the correct attribute types (compare them to an empty 2d_bc layer or |
|suggestions=Ensure that the 2d_bc GIS layer that is causing the issue has the correct attribute types (compare them to an empty 2d_bc layer or refer to the <u>[https://docs.tuflow.com/classic-hpc/manual/latest/ TUFLOW Manual]</u>) and that the layer contains all the required attributes (e.g. you aren't accidentally using a 1d_bc GIS input). |
||
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]] |
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]] |
||
Latest revision as of 15:42, 28 May 2025
TUFLOW Message
ERROR 2817 - Reading data in 2d_bc format.
Alternate Message
NA
Message Type
ERROR
Description
There was an error reading in the 2d_bc GIS layer attributes. This is typically caused by incorrect attribute types or the number of attributes.
Suggestions
Ensure that the 2d_bc GIS layer that is causing the issue has the correct attribute types (compare them to an empty 2d_bc layer or refer to the TUFLOW Manual) and that the layer contains all the required attributes (e.g. you aren't accidentally using a 1d_bc GIS input).
| Up |
|---|
 2xxx Messages
|