TUFLOW Message 2661: Difference between revisions
Jump to navigation
Jump to search
Content deleted Content added
Created page with "{{TUFLOW_Message |tuflow_message=ERROR 2660 - SX groundwater connection specified for invalid layer (connecting layer must be 1 or larger). |alt_msg=N/A |type=ERROR |messa..." |
No edit summary |
||
| Line 1: | Line 1: | ||
{{TUFLOW_Message |
{{TUFLOW_Message |
||
|tuflow_message=ERROR |
|tuflow_message=ERROR 2661 - SX groundwater connection specified for invalid layer (connecting layer must be 1 or larger). |
||
|alt_msg=N/A |
|alt_msg=N/A |
||
|type=[[ERROR]] |
|type=[[ERROR]] |
||
Latest revision as of 09:26, 23 July 2025
TUFLOW Message
ERROR 2661 - SX groundwater connection specified for invalid layer (connecting layer must be 1 or larger).
Alternate Message
N/A
Message Type
ERROR
Description
An invalid layer was specified for a SX to groundwater connection. The format for the boundary (2d_bc) GIS layer flag attribute is GW followed by a number 1-9 such as GW3 for groundwater layer 3. This message suggests that a 0 or negative value was provided for the layer.
Suggestions
Change the number following GW in the 2d_bc layer to be a valid groundwater layer.
For more information on 2d_bc attributes for SX to groundwater, refer to the TUFLOW Manual.
| Up |
|---|
 2xxx Messages
|