|
</ol>
== ESTRY Control File (ECF) ==
ThereAt havethis beenstage, threethe following changes toare themade model that impactto the ECF file:
*We have created aA 1d_nwk layer representingis created to represent the culverts of the proposed pipe network.
*We have created aA 1d_nwk layer representingis created to represent the pits of the proposed pipe network.
*We have created aA pit inlet database thatis created to linkslink depth-discharge curves to the pit inlet type.<br>
<ol>
<li>Open <b>FMT_M01_001.ecf</b> in your text editor. Save the file as <b>FMT_M02_001.ecf</b>.</li>
<li> Open <b>FMT_M02_001.ecf</b><br></li>
<li> Add the following commands at the bottom of the file as follows:
<div>
<br><u>'''QGIS - GPKGSHP'''</u><br> ▼<br><u>'''QGIS - SHP'''</u><br><font color="blue"><tt>Read GIS Network</tt></font> <font color="red"><tt>==</tt></font> gis\1d_nwk_FMT_M02_Pipes_001_L.SHP ▼:<font color="blue"><tt>Read GIS Network</tt></font> <font color="red"><tt>==</tt></font> gis\1d_nwk_FMT_M02_Pits_001_P1d_nwk_FMT_M02_Pipes_001_L.SHPshp<br>
:<font color="blue"><tt>PitRead InletGIS DatabaseNetwork</tt></font> <font color="red"><tt>==</tt></font> ..gis\pit_dbase\pit_inlet_dbase1d_nwk_FMT_M02_Pits_001_P.csvshp<br>
:<font color="blue"><tt>ReadPit GISInlet NetworkDatabase</tt></font> <font color="red"><tt>==</tt></font> gis..\1d_nwk_FMT_M02_Channels_001_Lpit_dbase\pit_inlet_dbase.SHPcsv<br>
:<font color="blue"><tt>Read GIS Network</tt></font> <font color="red"><tt>==</tt></font> xsgis\1d_xs_FMT_M02_Creek_001_L1d_nwk_FMT_M02_Channels_001_L.SHPshp<br>
:<font color="blue"><tt>Read GIS Network</tt></font> <font color="red"><tt>==</tt></font> gisxs\1d_nwke_X1DQ_P1d_xs_FMT_M02_Creek_001_L.shp<br>
:<font color="blue"><tt>Read GIS BCNetwork</tt></font> <font color="red"><tt>==</tt></font> gis\1d_BC_FMT_M02_001_P1d_nwke_X1DQ_P.shp<br>
:<font color="blue"><tt>Read GIS BC</tt></font> <font color="red"><tt>==</tt></font> gis\1d_BC_FMT_M02_001_P .shp<br>▼
<u>'''QGIS - GPKG'''</u><br>
▲<br><u>'''QGIS - SHP'''</u><br><font color="blue"><tt>Read GIS Network</tt></font> <font color="red"><tt>==</tt></font> gis\1d_nwk_FMT_M02_Pipes_001_L .SHP<br>
▲<br><u>'''QGIS - GPKG'''</u><br>
:<font color="blue"><tt>Read GIS Network</tt></font> <font color="red"><tt>==</tt></font> 1d_nwk_FMT_M02_Pipes_001_L1d_nwk_FMT_M02_Pits_001_P<br>
:<font color="blue"><tt>ReadPit GISInlet NetworkDatabase</tt></font> <font color="red"><tt>==</tt></font> 1d_nwk_FMT_M02_Pits_001_P ..\pit_dbase\pit_inlet_dbase.csv<br>
:<font color="blue"><tt>PitRead InletGIS DatabaseNetwork</tt></font> <font color="red"><tt>==</tt></font> ..\pit_dbase\pit_inlet_dbase.csv 1d_nwk_FMT_M02_Channels_001_L<br>
:<font color="blue"><tt>Read GIS Network</tt></font> <font color="red"><tt>==</tt></font> 1d_nwk_FMT_M02_Channels_001_L1d_xs_FMT_M02_Creek_001_L<br>
:<font color="blue"><tt>Read GIS Network</tt></font> <font color="red"><tt>==</tt></font> 1d_xs_FMT_M02_Creek_001_L1d_nwke_X1DQ_P<br>
:<font color="blue"><tt>Read GIS NetworkBC</tt></font> <font color="red"><tt>==</tt></font> 1d_nwke_X1DQ_P1d_BC_FMT_M02_001_P
</div>
▲:<font color="blue"><tt>Read GIS BC</tt></font> <font color="red"><tt>==</tt></font> 1d_BC_FMT_M02_001_P
</li>
<li value="4">Save the file. The 1D controlECF file is now ready to be used.</olli>
</ol>
==TUFLOW Boundary Control File (TBC)==
|