Difference between revisions of "TUFLOW Message 2224"
Jump to navigation
Jump to search
| Line 3: | Line 3: | ||
|alt_msg=NA | |alt_msg=NA | ||
|type=[[ERROR]] | |type=[[ERROR]] | ||
| − | |message_desc=FC type specified is unrecognised. Valid options are detailed in the FC_Type attribute in Table 4.19 of the 2010 TUFLOW manual. | + | |message_desc=FC type specified is unrecognised. Valid options are detailed in the FC_Type attribute in Table 4.19 of the 2010 TUFLOW manual.<br> |
| − | |suggestions=Specify a valid FC type. | + | If you are using a layered flow constriction shape (2d_lfcsh) layer this will need to be inputted with the <tt>Read GIS Layered FC Shape</tt> command. |
| + | |suggestions=Specify a valid FC type and check that the layer has the correct GIS attributes, as outlined in Table 4.19 of the 2010 TUFLOW manual. | ||
|discussion_page=* [[Talk:TUFLOW Message 2224|Discuss Message 2224]] | |discussion_page=* [[Talk:TUFLOW Message 2224|Discuss Message 2224]] | ||
|link3='' | |link3='' | ||
Revision as of 08:21, 19 March 2013
TUFLOW Message
ERROR 2224 - Unrecognisable FC type specified of <iputted FC type>.
Alternate Message
NA
Message Type
ERROR
Description
FC type specified is unrecognised. Valid options are detailed in the FC_Type attribute in Table 4.19 of the 2010 TUFLOW manual.
If you are using a layered flow constriction shape (2d_lfcsh) layer this will need to be inputted with the Read GIS Layered FC Shape command.
Suggestions
Specify a valid FC type and check that the layer has the correct GIS attributes, as outlined in Table 4.19 of the 2010 TUFLOW manual.
| Up |
|---|
 2xxx Messages
|