TUFLOW Message 1207: Difference between revisions
Jump to navigation
Jump to search
Content deleted Content added
Steph.dufour (talk | contribs) Created page with "{{TUFLOW_Message |tuflow_message=ERROR 1207 - Default manhole type for digitised manholes with blank Type must be C, J or R. |alt_msg=N/A |type=ERROR |message_desc=For man..." |
Steph.dufour (talk | contribs) No edit summary |
||
| Line 3: | Line 3: | ||
|alt_msg=N/A |
|alt_msg=N/A |
||
|type=[[ERROR]] |
|type=[[ERROR]] |
||
|message_desc=For manually specified manholes, the manhole type using the command '''Manhole Default Type ==''' |
|message_desc=For manually specified manholes, the manhole type has been left blank and the default setting using the command '''Manhole Default Type ==''' is set to CR or CJR. |
||
|suggestions='''Manhole Default Type ==''' must be set to C, J or R. The CR and CJR options cannot be used noting that CJR is the default. |
|suggestions='''Manhole Default Type ==''' must be set to C, J or R. The CR and CJR options cannot be used noting that CJR is the default. |
||
|discussion_page=* [[Talk:TUFLOW Message 1207|Discuss Message 1207]] |
|discussion_page=* [[Talk:TUFLOW Message 1207|Discuss Message 1207]] |
||
Revision as of 10:38, 23 September 2014
TUFLOW Message
ERROR 1207 - Default manhole type for digitised manholes with blank Type must be C, J or R.
Alternate Message
N/A
Message Type
ERROR
Description
For manually specified manholes, the manhole type has been left blank and the default setting using the command Manhole Default Type == is set to CR or CJR.
Suggestions
Manhole Default Type == must be set to C, J or R. The CR and CJR options cannot be used noting that CJR is the default.
| Up |
|---|
 1xxx Messages
|