TUFLOW Message 1276: Difference between revisions

From Tuflow
Jump to navigation Jump to search
Content deleted Content added
No edit summary
No edit summary
Line 1: Line 1:
{{TUFLOW_Message
{{TUFLOW_Message
|tuflow_message=ERROR 127 - Could not find any channel ends for the pit within the Pit Search Distance.
|tuflow_message=ERROR 1276 - Could not find any channel ends for the pit within the Pit Search Distance.
|alt_msg= N/A
|alt_msg= N/A
|type=[[ERROR]]
|type=[[ERROR]]
|message_desc= No channel nodes within the search distance specified using the ecf command '''Pit Search Distance''' have been found. Note, prior to Build 2013-12-AA, this message was only written to the tlf file.
|message_desc= No channel nodes within the search distance specified using the ecf command '''Pit Search Distance''' have been found. Note, prior to Build 2013-12-AA, this message was only written to the tlf file.
|suggestions=Check for digitised channel nodes within the pit search distance using the 1d_nwk_N_check layer. Consider increasing the search distance using the '''Pit Search Distance''' command.
|suggestions=????
|discussion_page=* [[Talk:TUFLOW Message 1275|Discuss Message 1275]]
|discussion_page=* [[Talk:TUFLOW Message 1275|Discuss Message 1275]]
|link3=''
|link3=''

Revision as of 14:12, 29 September 2014

TUFLOW Message
ERROR 1276 - Could not find any channel ends for the pit within the Pit Search Distance.

Alternate Message
N/A

Message Type
ERROR

Description
No channel nodes within the search distance specified using the ecf command Pit Search Distance have been found. Note, prior to Build 2013-12-AA, this message was only written to the tlf file.

Suggestions
Check for digitised channel nodes within the pit search distance using the 1d_nwk_N_check layer. Consider increasing the search distance using the Pit Search Distance command.


Up
1xxx Messages