Revision as of 09:46, 7 October 2014 view source Steph.dufour (talk \| contribs) 756 edits No edit summary ← Older edit		Revision as of 19:18, 9 April 2015 view source Steph.dufour (talk \| contribs) 756 edits No edit summary Newer edit →
Line 3: \|alt_msg=NA \|type=[[ERROR]] \|message_desc=The event specified when simulating the model is not defined in the .tef event file. \|message_desc=An event is is used which is not defined in the event file (.tcf command: <font color="green"><tt>Event File == <event file.tef></tt></font>. In the event file (.tef) each event should be defined with a <font color="green"><tt>Define Event == <event name></tt></font>. An example of an event file is provided in Section 4.12.1 of the 2010 TUFLOW manual. \|suggestions= The event used for the simulation is either specified using the .tcf command: <font color="blue"><tt> Model Events </tt></font><font color="red"><tt>==</tt></font>, or by using the –e switch when executing the model from a [[Run_TUFLOW_From_a_Batch-file\|batch file]], and may be verified within the .tlf log file. Note that the latter takes priority over the former. Commands relevant to this event have not been defined with a <font color="blue"><tt>Define Event </tt></font><font color="red"><tt>==</tt></font> command within the event file (.tef). An example of an event file is provided in Section 4.12.1 of the 2010 TUFLOW manual. Check the event name used for the simulation and ensure an entry exists for this event in the event file (.tef). ~~\|suggestions=Check event name used in batch file and ensure an entry exists for this event in the event file (.tef)~~ \|discussion_page=* [[Talk:TUFLOW Message 2308\|Discuss Message 2308]] \|link3=''

TUFLOW Message 2308: Difference between revisions