Revision as of 01:09, 13 January 2016 view source Steph.dufour (talk \| contribs) 756 edits No edit summary ← Older edit		Revision as of 01:16, 13 January 2016 view source Steph.dufour (talk \| contribs) 756 edits No edit summary Newer edit →
Line 4: \|type=[[ERROR]] \|message_desc=Missing data has been encountered within the source csv file referenced within a 1d_tab GIS layer for one or more columns. \|suggestions=Open the source csv file and ensure data has been populated for all expected columns. The text within the TLF file immediately encountered prior to the [[ERROR]] message will specify which columns TUFLOW is expecting data. In the example below, the TLF file states that data in columns 1, 2 and 5 are expected within the "FC04.1_C_013.csv" file. <br> If using an optional flag within a XZ, CS or HW table, note that the data correlating to the flag must be entered within certain columns and differs for different flags. Refer to Table 4.17 within the 2010 Manual and [[TUFLOW Message 1061\|ERROR 1061]] for further information. In this case, the text within the TLF file immediately encountered prior to the [[TUFLOW Message 1061\|ERROR 1061]] message will specify which columns TUFLOW is expecting data. In the example below, the TLF file states that data in columns 1, 2 and 5 are expected within the "FC04.1_C_013.csv" file. <br>▼ <br> [[File:ERROR1061.JPG]] ▲If using an optional flag within a XZ, CS or HW table, note that the data correlating to the flag must be entered within certain columns and differs for different flags. Refer to Table 4.17 within the 2010 Manual and [[TUFLOW Message 1061\|ERROR 1061]] for further information. \|discussion_page=* [[Talk:TUFLOW Message 1063\|Discuss Message 1063]] \|link3=''

TUFLOW Message 1063: Difference between revisions