Difference between revisions of "1D Bridges"
Jump to navigation
Jump to search
Rohan.king (talk | contribs) m (→Introduction) |
Rohan.king (talk | contribs) m |
||
| Line 17: | Line 17: | ||
<br> | <br> | ||
| + | =Irregular shaped bridges= | ||
| + | =Typical checks= | ||
[[File:Small_bridge.jpg|border|600px]] <br> | [[File:Small_bridge.jpg|border|600px]] <br> | ||
Revision as of 03:45, 30 January 2016
Page Under Construction
Introduction
The following section looks at bridges using the 1D component of TUFLOW, for information on bridges in the 2D domain please see the following section on 2D hydraulic Structures and Module 6.
- Link to 2D section – this section explains 1D bridges only.
- Advice on when you would model a 1D bridge versus a 2D bridge (read module 6).
- Examples on a XZ and HW bridge type – pictures & csv examples
- Information on the checks you can carry out
- Theory
- Loss types (piers Kp, blockage Kb)
- Guidance/reference on how to derive losses
- Make sure to include section on automation of pier losses?
- Method A & Method B for bridges – refer to Bill’s post on 1.56 value
Irregular shaped bridges
Typical checks
Any further questions please email TUFLOW support: support@tuflow.com