TUFLOW Message 1152
Revision as of 10:29, 31 March 2021 by Pavlina Monhartova (talk | contribs)
TUFLOW Message
CHECK 1152 - For channel ",a,", using centre cross-section and ignoring end cross-section(s).
Alternate Message
NA
Message Type
CHECK
Description
A cross-section has been found at the channel centre (as opposed to channel ends), this takes priority and end-section(s) are being ignored.
Suggestions
Review channel and check a centre cross-section is intentional. This usually happens with weirs and bridges embedded in 1D channels with their own cross section.
| Up |
|---|
 1xxx Messages
|