TUFLOW Message 3037
Revision as of 10:21, 20 April 2018 by Teegan.Burke (talk | contribs)
TUFLOW Message
ERROR 3037: Cell area factors must be >= 0.0001.
Alternate Message
None
Message Type
ERROR
Description
The value of specified Storage Reduction Factor must be greater than 0.0001 (0.01%).
Suggestions
The Storage Reduction Factor (SRF) can be used to reduce the storage of 2D cells (for example to model hypothetical filling, or reduced storage from buildings). It is a reduction factor, so if a cell has a SRF value of 0.1, then its storage (surface area) is reduced by 10%.
| Up |
|---|
 3xxx Messages
|