TUFLOW Message 2151

TUFLOW Message
ERROR 2151 - No cyclone track points with attributes snapped to tracking line.

Alternate Message
NA

Message Type
ERROR

Description
No cyclone track points with attributes snapped to tracking line. When using the .tcf commands Read GIS Cyclone == or Read GIS Hurricane == to input cyclone / hurricane, the following logic is used by TUFLOW. The first polyline in the layer is read and used for the track. Points are snapped to the line wherever attribute data are to be assigned. It is not necessary to have points snapped to every vertex of the line – values will be interpolated between the digitised points. There must be points with attribute data snapped to the start and end of the polyline track.

Suggestions
Check cyclone track data and ensure points are snapped to polyline (cyclone track).

Up
2xxx Messages