TUFLOW Message 2171

From Tuflow
Revision as of 13:48, 7 February 2023 by Melissa.Moghanloo (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

TUFLOW Message
ERROR 2171 - Exceeded limit of allowable vertices in a single Z polyline or region.

Alternate Message
ERROR 2171 - Exceeded limit of allowable vertices in a single Z polyline.

Message Type
ERROR

Description
Exceeded limit of allowable vertices in a single Z Line polyline. The maximum number of vertices can be increased with the .tcf command Maximum Vertices == <number of vertices>, the default is 100,000. This command controls the maximum number of vertices that can exist in a single polyline or polygon in a GIS layer referenced by commands such as Create TIN Zpts, Read GIS Z Line, Read GIS Z HX Line, Read GIS Z Shape, Read GIS Variable Z Shape, Read GIS FC Shape and Read GIS Layered FC Shape. If the number of vertices exceeds the amount specified, an ERROR 2171 occurs and this command needs to be used to increase the maximum number of vertices . This value can also be lowered to reduce RAM requirements.

Suggestions
Increase maximum number of vertices allowed using .tcf command Maximum vertices == <number of points> or split input layer.

See also Message 2170


Up
Go-up.png 2xxx Messages
Retrieved from "https://wiki.tuflow.com/w/index.php?title=TUFLOW_Message_2171&oldid=31787"