TUFLOW Message 1066
Revision as of 09:45, 23 September 2024 by Emilie Nielsen (talk | contribs)
TUFLOW Message
ERROR 1066 - Invalid P value(s) specified for cross-section ",a," in ",a,
Alternate Message
NA
Message Type
ERROR
Description
For an XZ type cross-section the P values define the position of the XZ point. This indicates whether an XZ point is left bank (1), mainstream (2) or right bank (3). P values must be entered as 1, 2 or 3. For more details, refer to the TUFLOW Manual.
Suggestions
If using P values, these must be either 1, 2 or 3.
| Up |
|---|
 1xxx Messages
|