TUFLOW Message 2497

From Tuflow
Revision as of 15:58, 7 October 2024 by Emilie Nielsen (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

TUFLOW Message
ERROR 2497 - Using Set IGW Conc command when no tracers have been specified.

Alternate Message
ERROR 2497 - Using Read GIS IGW Conc command when no tracers have been specified.

Message Type
ERROR

Description
Using the TGC command Set IGW Conc or Read GIS IGW Conc when no tracers have been specified.

Suggestions
Specify tracers, or remove the command from the TGC.
Refer to the TUFLOW Manual for further information on the Set IGW Conc and Read GIS IGW Conc command parameters.


Up
Go-up.png 2xxx Messages
Retrieved from "https://wiki.tuflow.com/w/index.php?title=TUFLOW_Message_2497&oldid=41081"