TUFLOW Message 3508
Revision as of 10:56, 12 November 2024 by Emilie Nielsen (talk | contribs)
TUFLOW Message
WARNING 3508 - SGS Sample frequency greater than limit of "<>".
Alternate Message
NA
Message Type
WARNING
Description
SGS sample frequency has been set to a value greater than the limit of "<>".
Suggestions
Check that the SGS sample frequency of the model is less than the limit "<>". I.e. Ensure the .tcf command(s) "SGS Sample Frequency ==" and/or "SGS Max Sample Frequency ==" are set to less than "<>". When the SGS sample frequency is greater than "<>", it is set based on the minimum grid elevation resolution in the .tgc (if available), or set to the default frequency of 11 per face.
Please refer to the TUFLOW Manual for further information on SGS Sample Frequency.
| Up |
|---|
 3xxx Messages
|