TUFLOW Message 3549

From Tuflow
Revision as of 15:11, 12 November 2024 by Emilie Nielsen (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

TUFLOW Message
WARNING 3549 - No SGS Sample Frequency, SGS Sample Distance Target found in .tcf, using sample frequency of 11.

Alternate Message
NA

Message Type
WARNING

Description
No SGS Sample Frequency, SGS Sample Distance Target found in .tcf, using sample frequency of 11. The .tcf commands "SGS Sample Target Distance ==" and "SGS Sample Frequency ==" were not defined, and there were no "Read Grid Zpt ==" command(s) specified in the .tgc. Therefore, the SGS sampling frequency was set to the default of 11 per face.

Suggestions
For an optimal SGS sampling frequency, either; set the "SGS Sample Target Distance ==" command, or use the .tgc command "Read Grid Zpt ==" to set the Zpt elevations.
Please refer to the TUFLOW Manual for more information.


Up
Go-up.png 3xxx Messages
Retrieved from "https://wiki.tuflow.com/w/index.php?title=TUFLOW_Message_3549&oldid=41357"